空气雾化喷嘴压力输送喷雾装置（内混式）
喷雾喷嘴的优点和特性：
对于扇形喷雾，尺寸A、B、和C是距离喷嘴相应距离处的喷雾宽度。
从喷嘴到很大弥散点的喷雾投射总距离为D.
当使用压力输送液体系统时，液体通过压力被送往喷嘴。液体和压缩空气或者其他气体在内部被混合，以产生完全雾化的喷雾。
Air atomizing nozzle pressure spray device (mixed type)
The advantages of spray nozzle and features:
For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray width.
The spray from the nozzle to the maximum dispersion point projected a total distance of D.
When using pressure conveying liquid system, through the pressure to the nozzle.Liquid and compressed air or other gas was mixed in internal, to produce a fully atomized spray.
窄角高冲击力扇形喷嘴，舌型喷嘴P系列
P或P-Z系列喷嘴很好的特点之一是能够产生较小的具有高冲击的扇形状喷雾。P系列喷嘴产生的喷雾分布均匀，液滴大小中等。
P及P-Z系列喷嘴带有外管道螺纹接头的整体设计。大且通畅的流道极大程度的减少了 阻塞现象。经精细工艺加工而成的导流平面能够确保均匀的、高冲击力的扇形喷雾，喷雾形状完整，具有清晰确定的边缘。
一般应用：
洗涤碎砾石；
高冲击力洗涤；
清除油渍；
水果与蔬菜洗涤；
造纸机稳纸框喷雾；
Narrow Angle high impact fan nozzle, tongue type nozzle P series
P or P - Z series nozzle can produce good is one of the features of smaller fan shape with high impact spray.P series of nozzle spray uniform distribution, droplet size medium.
P and P - Z series nozzles with the integral design of the outer pipe nipple.Big and smooth flow of maximum reduce the blocking phenomenon.Fine processing technology of diversion and plane to ensure uniform, high impact fan-shaped spray, spray shape integrity, have clearly defined edges.
General application:
Washing crushed gravel;
High impact washing;
Remove oil stains;
Fruit and vegetable washing;
Paper machine steady spray paper box;
小流量空气雾化喷嘴BIM系列：
产生平均粒径100micron以下之“微雾”的二流体扇形喷嘴；
对喷雾液体加0.1-0.3MAa程度之压力的液体加压式，有很广的流量调整范围；
喷雾角度60°。
产生平均粒径30micron以下之微雾的二流体扇形喷嘴，不需要供给液体加压装置之虹吸式。
一般应用：
散步：脱模机、除臭剂、油、表面处理剂、防锈剂、润滑剂、蜂蜜、防虫剂、尿素水、其他；
冷却：模具、气体、钢板、钢片、铸物、车体、涂装物、玻璃板、塑胶、其他。
调湿：纸、废气、陶瓷、混凝土、其他
洗净：精密基板、玻璃管、其他
Small flow air atomizing nozzle BIM series:
Below the average particle size of 100 micron 'micro fog' two fluid fan nozzle;
To spray liquid pressure of 0.1 to 0.3 degree of MAa liquid pressure type, there is a wide range of flow adjusting range;
The spray Angle 60 °.
Have an average particle size of micro fog two fluid under 30 micron fan nozzle, do not need to supply the siphon type of liquid pressure device.
General application:
Walking: stripper, deodorant, oil, surface treatment agent, anti-rust agent, lubricant, honey, pest control, urea and other water;
Cooling: mold, gas, steel plates, steel sheets, casting material, car body, coating material, glass, plastic and other.
Humidity: paper, waste gas, ceramic, concrete, other
Wash: precision base board, glass tube, the other
