空气雾化喷嘴通过外部混合装置改变气体压力而不改变液体流率来控制雾化，对于扇形喷雾，尺寸”A“流型宽度,如图所示。喷嘴从喷嘴投射到很大弥散点的总距离为“D”。
雾化喷嘴可以随时的调整气压和水压，比例可随时调整，1：15.
喷雾角度为扇形和实心。角度60°。
接口螺纹大小为3/4.
Air atomizing nozzle changing gas pressure by external mixing device without changing the liquid flow rate to control the atomization, the fan-shaped spray, dimension 'A' type flow width, as shown.Nozzle of projects from the nozzle to the maximum dispersion point total distance for the 'D'.
Atomizing nozzle can adjust the air pressure and water pressure, ratio can be adjusted at any time, 1:15.
The spray Angle for the fan and solid.Angle 60 °.
Interface thread size for three quarters.
窄角高冲击力扇形喷嘴，舌型喷嘴P系列
P或P-Z系列喷嘴很好的特点之一是能够产生较小的具有高冲击的扇形状喷雾。P系列喷嘴产生的喷雾分布均匀，液滴大小中等。
P及P-Z系列喷嘴带有外管道螺纹接头的整体设计。大且通畅的流道极大程度的减少了 阻塞现象。经精细工艺加工而成的导流平面能够确保均匀的、高冲击力的扇形喷雾，喷雾形状完整，具有清晰确定的边缘。
一般应用：
洗涤碎砾石；
高冲击力洗涤；
清除油渍；
水果与蔬菜洗涤；
造纸机稳纸框喷雾；
Narrow Angle high impact fan nozzle, tongue type nozzle P series
P or P - Z series nozzle can produce good is one of the features of smaller fan shape with high impact spray.P series of nozzle spray uniform distribution, droplet size medium.
P and P - Z series nozzles with the integral design of the outer pipe nipple.Big and smooth flow of maximum reduce the blocking phenomenon.Fine processing technology of diversion and plane to ensure uniform, high impact fan-shaped spray, spray shape integrity, have clearly defined edges.
General application:
Washing crushed gravel;
High impact washing;
Remove oil stains;
Fruit and vegetable washing;
Paper machine steady spray paper box;
空气雾化喷嘴虹吸和重力传送喷雾装置（圆形喷雾和扇形喷雾）
优点和特性
对于圆形和扇形喷雾，在整个距离B中都保持角度A，超出距离B，喷雾变成湍流，并一直喷射到D距离；
当使用虹吸或重力输送液体时，液体通过虹吸或重力作用被送往喷嘴；
这些装置的设计让液体被吸入输送管路进入气流，并在其中被雾化。
Send the spray air atomizing nozzle siphon and gravity, circular spray and fan-shaped spray)
Characteristics and advantages
For circular and fan-shaped spray, remained in the whole distance B Angle A, B, beyond distance spray into turbulence, and injection to D distance;
When using siphon or gravity conveying liquid, the liquid through a siphon or gravity was taken to the nozzle;
These devices designed for liquid pipelines are inhaled into the air, and by atomization in it.
